Parts

If you are just building one half, you don't need a TRRS jack or cable.

Included in the kit

• Set of PCBs. Top, middle, and bottom are standard. Bases are extra.

• 2 TRRS jacks (CP-43514-ND)
• 62 1N4148w diodes
• 32 100NF 0805 capacitors
• 32 SK6812 or WS2812b RGB LEDs
• 28 3x1 Pin connectors

Half of the above values are included in a small bag with every half-kit.

Not included in the kit

• Keycaps, all Ergodox sets are compatible. The outer column supports 1u and 1.5u.
• 2 5V/16MHz Pro Micros with pins (official, blue clone, or black clone)
• 4 2U PCB-mount stabilizersTransparent stabilizers work best. The case does not support plate-mount stabs.
• 62 Switches. The PCB is alps-compatible but the top plate is not. For best RGB effects, get switches with transparent housings like Zealios, Cherry RGB, Gateron RGB, Aliaz, or Outemu Ice.
• TRRS cable
• Micro USB cable
• Bumper feet of your choice or rubber sheet (12"x12)

Tools required

• Soldering iron. I've used a few cheap ones that don't work so well, the Hakko FX-888D is worth every penny.
• Flush Cutters Can be found in hobby shops
• Solder wire 0.032" or smaller will make SMD soldering easier
• Tweezers to hold small components while soldering